Congestion Avoidance Commands; Display Qos Wred Interface - HPE FlexNetwork HSR6800 series Command Reference Manual
Comware 7 acl and qos
Hide thumbs
Also See for FlexNetwork HSR6800 series:
- Security command reference (538 pages) ,
- Configuration manual (503 pages) ,
- Command reference manual (35 pages)
Table of Contents
Advertisement
Congestion avoidance commands
display qos wred interface
Use display qos wred interface to display the WRED information for interfaces.
Syntax
display qos wred interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the WRED information for all interfaces.
Examples
# Display the WRED information for GigabitEthernet 2/1/4.
<Sysname> display qos wred interface
Interface: GigabitEthernet2/1/4
Current WRED configuration:
Exponent: 9 (1/512)
Pre
Low
------------------------------------------------------
0
10
1
10
2
10
3
10
4
10
5
10
6
10
7
10
Table 36 Command output
Field
Interface
Pre
Low
High
Dis-prob
Random-discard
Tail-discard
High
Dis-prob Random-discard
30
10
0
30
10
0
30
10
0
30
10
0
30
10
0
30
10
0
30
10
0
30
10
0
Description
Interface type and interface number.
IP precedence of packets.
Lower limit for a queue.
Upper limit for a queue.
Drop probability.
Number of packets dropped by WRED.
Number of packets dropped by tail drop.
Tail-discard
0
0
0
0
0
0
0
0
117
Advertisement
Table of Contents
