Cir Allow - HPE FlexNetwork HSR6800 series Command Reference Manual

undo cir
Default
The CIR for an FR class is 56000 bps.
Views
FR class view
Predefined user roles
network-admin
Parameters
committed-information-rate: Sets the CIR in the range of 1000 to 45000000 bps.
Usage guidelines
The set CIR takes effect on both incoming and outgoing traffic and must be equal to or smaller than
the outbound CIR ALLOW.
Examples
# Set the CIR to 32000 bps for FR class test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] cir 32000
Related commands
cbs

cir allow

ebs
cir allow
Use cir allow to set the CIR ALLOW for an FR class.
Use undo cir allow to delete the CIR ALLOW setting of an FR class.
Syntax
cir allow [ inbound | outbound ] committed-information-rate
undo cir allow [ inbound | outbound ]
Default
The CIR ALLOW for an FR class is 56000 bps..
Views
FR class view
Predefined user roles
network-admin
Parameters
inbound: Sets the CIR ALLOW for incoming packets. The inbound CBS ALLOW does not take effect
for FRTS.
outbound: Sets the CIR ALLOW for outgoing packets. The outbound CBS ALLOW does not take
effect for FRTP.
committed-information-rate: Sets the CIR ALLOW in the range of 1000 to 45000000 bps.
126