Car Percent - HPE FlexNetwork HSR6800 series Command Reference Manual

<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] car cir 200 cbs 51200 ebs 0 green pass red remark-dscp-pass
0

car percent

Use car percent to configure a CAR action in percentage in a traffic behavior.
Use undo car to restore the default.
Syntax
car cir percent cir-percent [ cbs cbs-time [ ebs ebs-time ] ] [ green action | red action | yellow
action ] *
car cir percent cir-percent [ cbs cbs-time ] pir percent pir-percent [ ebs ebs-time ] [ green action |
red action | yellow action ] *
undo car
Default
No CAR action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
Parameters
cir percent cir-percent: Specifies the CIR in percentage, in the range of 1 to 100.
cbs cbs-time: Specifies the CBS in the range of 50 to 2000 milliseconds. The actual CBS value is
cbs-time × the actual CIR value.
ebs ebs-time: Specifies the EBS in the range of 0 to 2000 milliseconds. The actual EBS value is
ebs-time × the actual CIR value.
pir percent pir-percent: Specifies the PIR in percentage, in the range of 1 to 100. The PIR value
must be greater than or equal to the CIR value.
green action: Specifies the action to take on packets that conform to the CIR. The default is pass.
red action: Specifies the action to take on packets that conform to neither CIR nor PIR. The default is
discard.
yellow action: Specifies the action to take on packets that conform to the PIR but not to the CIR. The
default is pass.
action: Sets the action to take on the packet:
•
discard: Drops the packet.
•
pass: Permits the packet to pass through.
•
remark-dot1p-pass new-cos: Sets the 802.1p priority value of the packet to new-cos and
permits the packet to pass through. The new-cos argument is in the range of 0 to 7.
•
remark-dscp-pass new-dscp: Sets the DSCP value of the packet to new-dscp and permits the
packet to pass through. The new-dscp argument is in the range of 0 to 63. Alternatively, you can
specify the new-dscp argument with af11, af12, af13, af21, af22, af23, af31, af32, af33, af41,
af42, af43, cs1, cs2, cs3, cs4, cs5, cs6, cs7, default, or ef.
•
remark-lp-pass new-lp: Sets the local precedence value of the packet to new-lp and permits
the packet to pass through. The new-lp argument is in the range of 0 to 7.
43