Fr Del Protocol - HPE FlexNetwork HSR6800 series Command Reference Manual

fr del protocol

Use fr del protocol ip to create a DE rule list and add an IP protocol-based DE rule.
Use undo fr del protocol ip to delete an IP protocol-based DE rule from a DE rule list.
Syntax
fr del list-number protocol ip [ acl acl-number | fragments | greater-than min-number | less-than
max-number | tcp-port tcpport-number | udp-port udpport-number ]
undo fr del list-number protocol ip [ fragments | acl acl-number | less-than bytes | greater-than
min-number | less-than max-number | tcp-port tcpport-number | udp-port udpport-number ]
Default
No DE rule lists exist.
Views
System view
Predefined user roles
network-admin
Parameters
list-number: Specifies a DE rule list number in the range of 1 to 10.
acl acl-number: Specifies the IP packets matching the ACL specified by its number in the range of
2000 to 3999.
fragments: Specifies all fragmented IP packets.
greater-than min-number: Specifies the IP packets that are greater than the specified number of
bytes. The value range for the min-number argument is 0 to 65535.
less-than max-number: Specifies the IP packets that smaller than the specified number of bytes.
The value range for the max-number argument is 0 to 65535.
tcp-port tcpport-number: Specifies the IP packets with the specified source or destination TCP port
number. The value range for the tcpport-number argument is 0 to 65535. The tcpport-number
argument can be either an upper-layer application name or the associated port number.
Table 38 Application names and TCP port numbers
Application name
bgp
chargen
cmd
daytime
discard
domain
echo
exec
finger
ftp
ftp-data
gopher
TCP port number
179
19
514
13
9
53
7
512
79
21
20
70
133