HPE FlexNetwork HSR6800 series Command Reference Manual page 34

Table 13 ICMPv6-specific parameters for IPv6 advanced ACL rules
Parameters
icmp6-type
{ icmp6-type
icmp6-code |
icmp6-message }
Table 14 ICMPv6 message names supported in IPv6 advanced ACL rules
ICMPv6 message name
echo-reply
echo-request
err-Header-field
frag-time-exceeded
hop-limit-exceeded
host-admin-prohib
host-unreachable
neighbor-advertisement
neighbor-solicitation
network-unreachable
packet-too-big
port-unreachable
redirect
router-advertisement
router-solicitation
unknown-ipv6-opt
unknown-next-hdr
Usage guidelines
Within an ACL, the permit or deny statement of each rule must be unique. If the rule you are creating
or editing has the same deny or permit statement as another rule in the ACL, the rule will not be
created or changed.
The object group you specify when creating or editing a rule must already exist. Otherwise, the rule
will not be created or changed.
You can edit ACL rules only when the match order is config.
To view the existing IPv6 basic and advanced ACL rules, use the display acl ipv6 all command.
The undo rule rule-id command without any optional parameters deletes an entire rule. If you
specify optional parameters, the undo rule rule-id command deletes the specified attributes for a
rule.
The undo rule [ rule-id ] { deny | permit } command can only be used to delete an entire rule. You
must specify all the attributes of the rule for the command.
Function Description
The icmp6-type argument is in the range of 0 to 255.
The icmp6-code argument is in the range of 0 to 255.
Specifies the ICMPv6
The icmp6-message argument specifies a message
message type and
name. Supported ICMP message names and their
code.
corresponding type and code values are listed in
14.
ICMPv6 message type
129
128
4
3
3
1
1
136
135
1
2
1
137
134
133
4
4
29
Table
ICMPv6 message code
0
0
0
1
0
1
3
0
0
0
0
4
0
0
0
2
1