Display Qos Queue L2Vpn-Pw - HPE FlexNetwork HSR6800 series Command Reference Manual

Field
Max active
Total

display qos queue l2vpn-pw

Use display qos queue l2vpn-pw to display the queuing information for PWs.
Syntax
display qos queue l2vpn-pw [ peer ip-address pw-id pw-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
peer ip-address pw-id pw-id: Specifies a PW by its peer PE LSR ID and its PW ID. The ip-address
argument represents the LSR ID of the peer PE of the PW. The value range for the pw-id argument is
1 to 4294967295. If you do not specify a PW, this command displays the queuing information for all
PWs.
Examples
# Display the queuing information for all PWs.
<Sysname> display qos queue l2vpn-pw
L2VPN-PW: peer 1.1.1.1, pw-id 1
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - FIFO queuing: Size/Length/Discards 0/75/0
L2VPN-PW: peer 2.2.2.2 pw-id 2
Output queue - Urgent queuing: Size/Length/Discards 0/100/0
Output queue - Protocol queuing: Size/Length/Discards 0/500/0
Output queue - Weighted Fair queuing: Size/Length/Discards 0/64/0
Weight: IP Precedence
Queues: Active/Max active/Total 0/0/128
Table 27 Command output
Field
L2VPN-PW
Size
Length
Discards
Weight
Description
Maximum number of active WFQ queues that was reached.
Total number of configured WFQ queues.
Description
A PW is uniquely identified by a combination of the peer PE IP
address and PW ID.
Total number of bytes of packets in all queues.
Number of packets allowed in each queue.
Number of packets dropped.
Weight type:
•
IP Precedence.
•
DSCP.
85