Qos Policy-Based Traffic Rate Statistics Collection Period Commands; Qos Flow-Interval - HPE FlexNetwork HSR6800 series Command Reference Manual

Examples
# Clear the statistics for the QoS policy applied to the outgoing traffic of the hub-spoke tunnel with
spoke's IPv4 address 192.168.0.3 on tunnel interface 1.
<Sysname> reset qos policy advpn tunnel 1 192.168.0.3 outbound
QoS policy-based traffic rate statistics collection
period commands

qos flow-interval

Use qos flow-interval to set the QoS policy-based traffic rate statistics collection period for an
interface.
Use undo qos flow-interval to restore the default.
Syntax
qos flow-interval interval
undo qos flow-interval
Default
The QoS policy-based traffic rate statistics collection period is 5 minutes on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets the QoS policy-based traffic rate statistics collection period in the range of 1 to 10
minutes.
Usage guidelines
You can enable collection of per-class traffic statistics over a period of time, including the average
forwarding rate and drop rate. For example, if you set the statistics collection period to 10 minutes,
the system performs the following operations:
•
Collects traffic statistics for the most recent 10 minutes.
•
Refreshes the statistics every 10/5 minutes, 2 minutes.
The traffic rate statistics collection period of a subinterface is the same as the period configured on
the main interface.
Examples
# Set the QoS policy-based traffic rate statistics collection period to 10 minutes on GigabitEthernet
2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] qos flow-interval 10
Related commands
display qos policy interface
71