Traffic Policing, Gts, And Rate Limit Commands; Traffic Policing Commands; Display Qos Car Interface - HPE FlexNetwork HSR6800 series Command Reference Manual

Traffic policing, GTS, and rate limit
commands

Traffic policing commands

display qos car interface

Use display qos car interface to display the CAR information for interfaces.
Syntax
display qos car interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify
an interface, this command displays the CAR information for all interfaces.
Examples
# Display the CAR information for GigabitEthernet 2/1/1.
<Sysname> display qos car interface gigabitethernet 2/1/1
Interface: GigabitEthernet2/1/1
Direction: inbound
Rule: If-match any
CIR 128 (kbps), CBS 5120 (Bytes), PIR 128 (kbps), EBS 512 (Bytes)
Green action
Yellow action : pass
Red action
Green packets : 0 (Packets), 0 (Bytes)
Yellow packets: 0 (Packets), 0 (Bytes)
Red packets
# Display the CAR information on GigabitEthernet 2/1/2.
<Sysname> display qos car interface gigabitethernet 2/1/2
Interface: GigabitEthernet2/1/2
Direction: inbound
Rule: If-match any
CIR 50 (%), CBS 600 (ms), EBS 0 (ms), PIR 50 (%)
Green action
Yellow action : pass
Red action
Green packets : 0 (Packets), 0 (Bytes)
Yellow packets: 0 (Packets), 0 (Bytes)
: pass
: discard
: 0 (Packets), 0 (Bytes)
: pass
: discard
72