Table of Contents
Advertisement
S9700 Core Routing Switch
Configuration Guide - SPU
Numbers of L3 classifier : 1
L3 classifier name
Action type
Current group name
# Simulate the internal network user at 10.10.10.2 to access the virtual IP address
20.20.20.200/24, and then view related information about servera, serverb, serverc, and
serverd on SPU. You can view the packet statistics about server instances servera and
serverb. The ratio of packets about servera and serverb is 4:3, indicating that user packets are
load balanced between Server A and Server B in WRR mode.
[SPU] display load-balance group name servergroup1 member name servera verbose
[SPU] display load-balance group name servergroup1 member name serverb verbose
[SPU] display load-balance group name servergroup1 member name serverc verbose
[SPU] display load-balance group name servergroup1 member name serverd verbose
# Disconnect the link between SPU and Server A, simulate the internal network user at
10.10.10.2 to access the virtual IP address 20.20.20.200/24, and then view related information
about servera, serverb, serverc, and serverd on SPU. You can view the packet statistics about
server instances servera and serverb, indicating that user packets are switched to Server C after
Server A is faulty.
[SPU] display load-balance group name servergroup1 member name servera verbose
[SPU] display load-balance group name servergroup1 member name serverb verbose
[SPU] display load-balance group name servergroup1 member name serverc verbose
[SPU] display load-balance group name servergroup1 member name serverd verbose
----End
Configuration Files
l
Issue 01 (2012-03-15)
Configuration file of the SPU
#
sysname SPU
#
vlan batch 1 12 13
#
acl number 3000
rule 5 permit ip destination 20.20.20.0 0.0.0.255
#
interface Eth-Trunk0
#
interface Eth-Trunk0.2
control-vid 2 dot1q-termination
dot1q termination vid 2
ip address 100.100.100.201 255.255.255.0
#
interface Eth-Trunk0.12
control-vid 12 dot1q-termination
dot1q termination vid 12
ip address 10.10.10.1 255.255.255.0
service load-balance policy lbp1
arp broadcast enable
#
interface Eth-Trunk0.13
control-vid 13 dot1q-termination
dot1q termination vid 13
ip address 20.20.20.5 255.255.255.0
arp broadcast enable
#
interface XGigabitEthernet0/0/1
eth-trunk 0
#
interface XGigabitEthernet0/0/2
eth-trunk 0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: l3cls1
: load-balance
: servergroup1
6 Load Balancing Configuration
246
Advertisement
Table of Contents
