Table of Contents
Advertisement
S9700 Core Routing Switch
Configuration Guide - SPU
Step 6 Verify the configuration.
# After the configurations are complete, run the display ip netstream all command in the user
view of the SPU to check the configurations.
<SPU> display ip netstream all
system
ip netstream export host 10.2.1.2 6000
ip netstream export source 10.2.1.1
ip netstream timeout inactive 100
ip netstream tcp-flag enable
XGigabitEthernet0/0/1
ip netstream inbound
----End
Configuration Files
Configuration file of Switch A
#
sysname SwitchA
#
vlan 100
#
interface Vlanif 100
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
return
Configuration file of Switch B
On the MPU:
#
sysname SwitchB
#
vlan batch 100 to 101 200
#
observe-port 1 interface XGigabitEthernet4/0/0
#
interface Vlanif 100
ip address 10.1.1.2 255.255.255.0
#
interface Vlanif 200
ip address 10.2.1.1 255.255.255.0
#
interface Vlanif 101
ip address 22.22.22.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
port-mirroring to observe-port 1 inbound
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 200
port hybrid untagged vlan 200
#
interface XGigabitEthernet4/0/1
port hybrid pvid vlan 101
port hybrid tagged vlan 101
Issue 01 (2012-03-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NetStream Configuration
169
Advertisement
Table of Contents
