Table of Contents
Advertisement
S9700 Core Routing Switch
Configuration Guide - SPU
l
l
l
l
Procedure
Step 1 Set IP addresses for interfaces on Switch A and Switch B. The configuration procedure is not
mentioned here.
Step 2 Configure the IGP route between Switch A and Switch B.
# Configure the dynamic route on Switch A.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] ospf router-id 1.1.1.1
[SwitchA-ospf-1] area 0
[SwitchA-ospf-1-area-0.0.0.0] network 10.1.1.1 0.0.0.255
# Configure the dynamic routing protocol on Switch B.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] ospf router-id 2.2.2.2
[SwitchB-ospf-1] area 0
[SwitchB-ospf-1-area-0.0.0.0] network 10.1.1.2 0.0.0.255
[SwitchB-ospf-1-area-0.0.0.0] network 10.2.1.1 0.0.0.255
[SwitchB-ospf-1-area-0.0.0.0] network 10.3.1.1 0.0.0.255
[SwitchB-ospf-1-area-0.0.0.0] quit
[SwitchB-ospf-1] quit
Step 3 # Set up dynamic BGP peer relationships between Switch B and Switch C.
# Configure Switch B
[SwitchB] bgp 65001
[SwitchB-bgp] router-id 2.2.2.2
[SwitchB-bgp] peer 10.2.1.2 as-number 65002
[SwitchB-bgp] ipv4-family unicast
[SwitchB-bgp-af-ipv4] import-route ospf 1
[SwitchB-bgp-af-ipv4]quit
[SwitchB-bgp]quit
# Configure Switch C
<Quidway> system-view
[Quidway] sysname SwitchC
[SwitchC] bgp 65002
[SwitchC-bgp] route-id 3.3.3.3
[SwitchC-bgp] peer 10.2.1.1 as-number 65001
Step 4 # Set up dynamic BGP peer relationships between Switch B and Switch D.
# Configure Switch B
[SwitchB] bgp 65001
[SwitchB-bgp] router-id 2.2.2.2
[SwitchB-bgp] peer 10.3.1.2 as-number 65003
[SwitchB-bgp]quit
# Configure Switch D
<Quidway> system-view
[Quidway] sysname SwitchD
Issue 01 (2012-03-15)
BGP process ID
IP address and port number of the NSC
Packet sampling ratio
Version number of exported packets
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NetStream Configuration
172
Advertisement
Table of Contents
