Table of Contents
Advertisement
S9700 Core Routing Switch
Configuration Guide - SPU
Figure 6-9 Networking diagram for configuring Layer 3 server load balancing in DMAC mode
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Apply the load balancing policy to a sub-interface.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Issue 01 (2012-03-15)
XGE5/0/0
XGE0/0/1
XGE5/0/1
XGE0/0/2
SwitchA
ServerA
20.20.20.1:80
Configure traffic importing.
Configure four servers to communicate with the four servers.
Configure a probe to detect the health status of the four servers.
Configure a server group and bind the server group to the four servers.
Configure a Layer 7 classifier.
Configure a load balancing action profile.
Configure an advanced ACL.
Configure a Layer 3 classifier.
Configure a load balancing policy.
Server names, connection quantity limits, connection rate limits, and bandwidth rate limits
Name and related parameters of the probe
Server group name, load balancing algorithm, and forwarding mode
Name and matching rule of the Layer 7 classifier
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10.10.10.2/24
Host
Internet
GE3/0/0
GE3/0/1
ServerB
20.20.20.2:4002
6 Load Balancing Configuration
SwitchB
VIP 20.20.20.200:80
ServerC
ServerD
20.20.20.3:80
20.20.20.4:8080
239
Advertisement
Table of Contents
