Table of Contents
Advertisement
S9700 Core Routing Switch
Configuration Guide - SPU
On the MPU:
#
sysname SwitchB
#
vlan batch 100 to 101 200
#
observe-port 1 interface XGigabitEthernet4/0/0
#
interface Vlanif 100
ip address 10.1.1.2 255.255.255.0
#
interface Vlanif 200
ip address 10.2.1.1 255.255.255.0
#
interface Vlanif 101
ip address 22.22.22.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 100
port hybrid untagged vlan 100
port-mirroring to observe-port 1 inbound
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 200
port hybrid untagged vlan 200
#
interface XGigabitEthernet4/0/1
port hybrid pvid vlan 101
port hybrid tagged vlan 101
#
return
On the SPU:
#
sysname SPU
#
interface XGigabitEthernet0/0/2.2
control-vid 101 dot1q-termination
dot1q termination vid 101
ip address 22.22.22.1 255.255.255.0
arp broadcast enable
#
ip route-static 10.2.1.0 255.255.255.0 XGigabitEthernet0/0/2.2 22.22.22.2
#
ip netstream export source 10.2.1.1
ip netstream export host 10.2.1.2 6000
#
interface XGigabitEthernet0/0/1
ip netstream sampler fix-packets 100 inbound
port ip netstream record test
ip netstream inbound
#
ip netstream record test
match ipv4 destination-address
match ipv4 destination-port
collect counter packets
collect counter bytes
collect interface input
collect interface output
#
return
Issue 01 (2012-03-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NetStream Configuration
179
Advertisement
Table of Contents
