Optional) Setting The Server Address; Optional) Transparently Transmitting User Status Detection Packets - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Security
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
mac-forced-forwarding gateway-detect
The timed gateway address detection is enabled.
After the timed gateway address detection is enabled, the S2700 sends ARP packets periodically
to detect the gateway.
By default, the timed gateway address detection is disabled.
----End

7.3.7 (Optional) Setting the Server Address

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
mac-forced-forwarding server server-ip &<1-10>
The IP address of the server deployed on the network is set.
----End
7.3.8 (Optional) Transparently Transmitting User Status Detection
Packets
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
The VLAN view is displayed.
Step 3 Run:
mac-forced-forwarding user-detect_transparent
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 MFF Configuration
145