Table of Contents
Advertisement
S9700 Core Routing Switch
Configuration Guide - SPU
Step 2 Run:
load-balance stickygroup stickygroup-name mask net-mask { source-ip | destination-
ip |
A sticky group is created and the sticky group view is displayed.
Up to 1024 sticky groups can be created.
By default, no sticky group is created.
Step 3 (Optional) Run:
description text
The description of the sticky group is configured.
By default, no description is configured for a sticky group.
Step 4 Run:
group master-group-name [
A server group is bound to the sticky group.
The name of a backup load balancing group must be different from the name of the master load
balancing group.
If the Layer 3 classifier bound to the sticky group is bound to a load balance policy, you cannot
modify the server group bound to the sticky group.
By default, no server group is bound to a sticky group.
Step 5 (Optional) Run:
time-out time
The aging time of dynamic sticky entries is set.
The dynamic sticky entries generated on a sticky group age after the aging time expires and
never take effect.
By default, the aging time of dynamic sticky entries is 1440 minutes.
Step 6 (Optional) Run:
static client {
[
A static sticky entry is configured.
The SPU supports static sticky entries based on the source IP address, the destination IP address,
or the source and destination IP addresses. Up to 4096 static sticky entries can be created.
l When source src-ip-address is specified, it indicates that a static sticky entry based on the
l When destination dest-ip-address is specified, it indicates that a static sticky entry based on
l When source src-ip-address and destination dest-ip-address are specified, it indicates that
Issue 01 (2012-03-15)
both-ip }
destination dest-ip-address |
destination dest-ip-address ]
source IP address is configured. When the packets with the source IP address specified by
src-ip-address match the static sticky entry, the packets are sent to the server specified by
member-name.
the destination IP address is configured. When the packets with the destination IP address
specified by dest-ip-address match the static sticky entry, the packets are sent to the server
specified by member-name.
a static sticky entry based on the source and destination IP addresses is configured. When
the packets with the source IP address specified by src-ip-address and the destination IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
backup backup-group-name ]
}
member member-name
6 Load Balancing Configuration
source src-ip-address
217
Advertisement
Table of Contents
