Table of Contents
Advertisement
S9700 Core Routing Switch
Configuration Guide - SPU
5.4.4 (Optional) Aging the TCP Traffic by Its FIN or RST Flag
Context
If the traffic received by the SPU contains the TCP FIN or RST flag, the traffic is aged. Then
the SPU stops the statistics collection and sends the result to the NSC.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ip netstream tcp-flag enable
The TCP traffic will be aged by its FIN or RST flag in the TCP packet header.
By default, the TCP traffic is not aged by the FIN or RST flag.
----End
5.4.5 (Optional) Configuring the Inactive Aging Time for the
Original Traffic
Context
After the inactive aging time is set for the original traffic, the SPU considers that the original
traffic is aged if the SPU does not receive any data packet from the original traffic within the
inactive aging time. Then the SPU stops the statistics collection and sends the result to the NSC.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ipv6 netstream timeout inactive inactive-interval
The inactive aging time is set for the original traffic.
By default, the inactive aging time of the original traffic is 30s.
----End
Issue 01 (2012-03-15)
NOTE
If multiple aging conditions are configured on the SPU, the traffic ages when it meets any condition.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 NetStream Configuration
155
Advertisement
Table of Contents
