Huawei S9700 Series Configuration Manual page 22

S9700 Core Routing Switch
Configuration Guide - SPU
5.
6.
7.
8.
9.
10. Run any of the following commands to add the interface to the VLAN based on the link
11. Run:
Step 2 Export data flows.
1.
2.
Issue 01 (2012-03-15)
Run:
port link-type { access | hybrid | trunk }
The link type of the interface is configured.
Run any of the following commands to add the interface to the VLAN based on the link
type of the interface:
l If the interface is an access interface, run the port default vlan vlan-id command to
configure the VLAN as the default VLAN of the interface.
l If the interface is a hybrid interface:
– Run the port hybrid tagged vlan { vlan-id1 [ to vlan-id2 ] }&<1-10> command to
add the interface to the VLAN in tagged mode.
– Run the port hybrid untagged vlan { vlan-id1 [ to vlan-id2 ] }&<1-10> command
to add the interface to the VLAN in untagged mode.
l If the interface is a trunk interface, run the port trunk allow-pass vlan { { vlan-id1
[ to vlan-id2 ] }&<1-10> | all command to add the interface to the VLAN.
Run:
quit
Exit from the interface view.
Run:
interface xgigabitethernet interface-number
The view of the virtual XGE interface on the S9700 is displayed.
Run:
port link-type { access | hybrid | trunk }
The link type of the interface is configured.
type of the interface:
l If the interface is an access interface, run the port default vlan vlan-id command to
configure the VLAN as the default VLAN of the interface.
l If the interface is a hybrid interface:
– Run the port hybrid tagged vlan { vlan-id1 [ to vlan-id2 ] }&<1-10> command to
add the interface to the VLAN in tagged mode.
– Run the port hybrid untagged vlan { vlan-id1 [ to vlan-id2 ] }&<1-10> command
to add the interface to the VLAN in untagged mode.
l If the interface is a trunk interface, run the port trunk allow-pass vlan { { vlan-id1
[ to vlan-id2 ] }&<1-10> | all command to add the interface to the VLAN.
quit
Exit from the interface view.
Run:
vlan vlan-id
The VLAN for outgoing data flows is created and the VLAN view is displayed.
Run:
quit
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 SPU Pre-Configuration
11