Huawei S9700 Series Configuration Manual page 279

S9700 Core Routing Switch
Configuration Guide - SPU
Outbound packets
Cur-connection
Closed-connections
Inbound Cur-bandwidths : 0(bytes/s)
Outbound Cur-bandwidths: 0(bytes/s)
# View the configuration of the Layer 7 classifier.
[SPU] display load-balance l7classifier name l7cls1
L7 classifier name : l7cls1
Description
Match mode
Match type
Case flag
Http URL
# View the configuration of the load balancing action.
[SPU] display load-balance action name act1
Action name
Description
Action type
Group name
# View the configuration of the Layer 3 classifier.
[SPU] display load-balance l3classifier name l3cls1
L3 classifier name
Description
Acl
ICMP reply
NAT ID
Pat
Connection parameter name : -
HTTP parameter name
L7 classifier name
L7 action name
# View the configuration of the load balancing policy.
[SPU] display load-balance policy name lbp1
Policy name
Description
Bound interface
Numbers of L3 classifier : 1
L3 classifier name
Action type
Current group name
# Simulate the internal network user at 10.10.10.2/24 to access the virtual IP address
20.20.20.2/24, and then view related information about servera, serverb, serverc, and
serverd on the SPU. You can view the packet statistics about server instances servera and
serverb. The ratio of packets about servera and serverb is 4:3, indicating that user packets are
transmitted through servergroup1 and are load balanced between Server A and Server B in
WRR mode.
[SPU] display load-balance group name servergroup1 member name servera verbose
[SPU] display load-balance group name servergroup1 member name serverb verbose
[SPU] display load-balance group name servergroup1 member name serverc verbose
[SPU] display load-balance group name servergroup1 member name serverd verbose
# Disconnect the link between the SPU and Server A, simulate the internal network user at
10.10.10.2/24 to access the virtual IP address 20.20.20.2/24, and then view related information
about servera, serverb, serverc, and serverd on the SPU. You can view the packet statistics
about server instances serverc and serverd, indicating that user packets are switched to Server
C after Server A is faulty.
Issue 01 (2012-03-15)
: 0
: 0
: 0
: -
: Or
: HTTP
: Sensitive
: 1 slbha[w|W](.*)
: act1
: -
: load-balance
: servergroup1
: l3cls1
: -
: 3000
: Disable
: 2
: Yes
: -
: l7cls1
: act1
: lbp1
: -
: Eth-Trunk 0.12
: l3cls1
: load-balance
: servergroup1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Load Balancing Configuration
268