Table of Contents
Advertisement
S9700 Core Routing Switch
Configuration Guide - SPU
Step 9 (Optional) Run:
fail-retrycount times
The retry count for a probe to detect link recovery is set.
By default, the retry count for a probe to detect link recovery is 3.
----End
6.3.4 Configuring a Link
This section describes how to create a link and set link parameters, including the IP address of
the gateway corresponding to the link, connection quantity limit, bandwidth limit, bandwidth
threshold, weight, and priority.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
load-balance member member-name
A link is created and the load balancing member view is displayed.
Up to 1024 links can be created.
By default, no link is configured.
Step 3 (Optional) Run:
description text
The description of a link is configured.
By default, no description is configured for a link.
Step 4 Run:
ip address ip-address
The IP address of the gateway corresponding to the link is set.
By default, the IP address of the gateway corresponding to the link is not set.
Step 5 (Optional) Run:
rate-limit { bandwidth { inbound | outbound } band-limit [ threshold
value ] | connection conn-limit }
The bandwidth limit, bandwidth threshold for receiving new traffic, and connection rate limit
of the link are set.
After selecting a link through the load balancing algorithm, the system compares the used
bandwidth and the connection rate with the bandwidth limit and connection rate limit. If the
bandwidth limit or connection rate limit is reached, the system does not select the link.
By default, the connection rate of a link is not limited, the inbound/outbound bandwidth limit is
1000000 kbit/s, and the inbound/outbound bandwidth threshold is 100%.
Step 6 (Optional) Run:
Issue 01 (2012-03-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Load Balancing Configuration
threshold-
195
Advertisement
Table of Contents
