Huawei S9700 Series Configuration Manual page 321

S9700 Core Routing Switch
Configuration Guide - SPU
[SPU-B-Eth-Trunk0.3] dot1q termination vid 13
[SPU-B-Eth-Trunk0.3] ip address 13.0.0.3 24
[SPU-B-Eth-Trunk0.3] arp broadcast enable
[SPU-B-Eth-Trunk0.3] quit
Step 6 Configure static routes on SPUs.
# Log in to SPU A to configure a static route.
[SPU-A] ip route-static 18.0.0.2 255.0.0.0 eth-trunk0.1 10.0.0.9
# Log in to SPU B to configure a static route.
[SPU-B] ip route-static 18.0.0.2 255.0.0.0 eth-trunk0.1 10.0.0.9
Step 7 Configure the channel between SPU A and SPU B.
# Log in to SPU A to set the source IP address to 13.0.0.2, the destination IP address to 13.0.0.3,
the source port number to 3001, and the destination port number to 4001 for the channel through
which dual-system HSB data is synchronized.
[SPU] hot-standby-group local 13.0.0.2 peer 13.0.0.3 src-data-port 3001 dst-data-
port 4001
[SPU] hot-standby enable
# Log in to SPU B to set the source IP address to 13.0.0.3, the destination IP address to 13.0.0.2,
the source port number to 4001, and the destination port number to 3001 for the channel through
which dual-system HSB data is synchronized.
[SPU] hot-standby-group local 13.0.0.3 peer 13.0.0.2 src-data-port 4001 dst-data-
port 3001
[SPU] hot-standby enable
Step 8 Verify the configuration.
# Log in to SPU A to check whether VRRP negotiation is correct and whether the channel
between SPU A and SPU B is set up successfully.
[SPU-A] display vrrp
Eth-Trunk0.1|Virtual Router 10
State
Virtual IP
PriorityRun
PriorityConfig
MasterPriority
Preempt
Delay Time
TimerRun
TimerConfig
Auth Type
Virtual Mac
Check TTL
Config type
Config track link-bfd down-number
Eth-Trunk0.2|Virtual Router 11
State
Virtual IP
PriorityRun
PriorityConfig
MasterPriority
Issue 01 (2012-03-15)
NOTE
l If the value of State of SPU A is Master and the value of State of SPU B is Backup, it indicates that
VRRP negotiation is correct.
l If the value of TCP State of the SPU is CONNECT, it indicates that the channel between SPU A and
SPU B is set up successfully.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Dual-System HSB Configuration
: Master
: 10.0.0.1
: 120
: 120
: 120
: YES
: 0
: 1
: 1
: NONE
: 0000-5e00-0164
: YES
: admin-vrrp
: 0
: Master
: 11.0.0.1
: 120
: 120
: 120
310