S9700 Core Routing Switch
Configuration Guide - SPU
Figure 5-3 Networking diagram of NetStream aggregation
Switch
Switch A
Switch B
Switch C
Switch D
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
l
Issue 01 (2012-03-15)
User
Network
GE1/0/0
SwitchA
GE1/0/0
SwitchC
Physical interface
GigabitEthernet1/0/0
GigabitEthernet1/0/0
GigabitEthernet2/0/0
GigabitEthernet3/0/0
GigabitEthernet1/0/1
GigabitEthernet1/0/0
GigabitEthernet2/0/0
Configure a reachable route between the user network and access network.
Configure reachable routes between the access network and ISP 1, and between the access
network between ISP 2.
Configure the NetStream function on the SPU of SwitchB.
IP addresses of interfaces
OSPF process ID
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
XGE4/0/0
XGE0/0/1
XGE4/0/1
VLAN101
VLANIF101
XGE0/0/2.2
22.22.22.2/24
22.22.22.1/24
GE1/0/1
GE3/0/0
GE1/0/0
GE2/0/0
SwitchB
ISP1
VLANIF interface
VLANIF30
VLANIF10
VLANIF20
VLANIF30
VLANIF40
VLANIF10
VLANIF20
5 NetStream Configuration
NSC&NDA
10.4.1.2/24
GE2/0/0
ISP2
SwitchD
IP address
10.1.1.1/24
10.2.1.1/24
10.3.1.1/24
10.1.1.2/24
10.4.1.1/24
10.2.1.2/24
10.3.1.2/24
171