Setting The Management Ip Address Of The S2700 - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Basic Configuration
Figure 10-5 Selecting a terminal type
After the preceding steps are complete, press Enter. If the prompt <Quidway> is displayed, it
indicates that you have logged in to the S2700. At this time, you can enter the command to
configure and manage the S2700.
----End

10.2.2 Setting the Management IP Address of the S2700

This section describes how to configure the management IP address of the S2700.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface vlanif interface-number
The view of the interface of the management VLAN is displayed.
Step 3 Run:
ip address ip-address { mask | mask-length } [ sub ]
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 Web System Configuration
185