Hello-Option Neighbor-Tracking (Ipv6 Pim View) - HP 6125XLG Command Reference Manual

Default
The global prune delay is 500 milliseconds.
Views
IPv6 PIM view
Predefined user roles
network-admin
Parameters
delay: Sets the prune delay (in milliseconds), in the range of 1 to 32767.
Usage guidelines
You can set the prune delay in IPv6 PIM view or interface view. The configurations made in IPv6 PIM view
are effective on all interfaces, and the configurations made in interface view are effective on only the
current interface. If you set the prune delay in both IPv6 PIM view and interface view, the configuration
in interface view always takes precedence.
Examples
# Set the global prune delay to 200 milliseconds.
<Sysname> system-view
[Sysname] ipv6 pim
[Sysname-pim6] hello-option lan-delay 200
Related commands
hello-option override-interval (IPv6 PIM view)
•
• ipv6 pim hello-option lan-delay
ipv6 pim hello-option override-interval
•

hello-option neighbor-tracking (IPv6 PIM view)

Use hello-option neighbor-tracking to enable the neighbor tracking function globally and disable the
join message suppression function.
Use undo hello-option neighbor-tracking to restore the default.
Syntax
hello-option neighbor-tracking
undo hello-option neighbor-tracking
Default
The neighbor tracking function is disabled, and the join message suppression function is enabled.
Views
IPv6 PIM view
Predefined user roles
network-admin
162