Pim Holdtime Join-Prune; Pim Neighbor-Policy - HP 6125XLG Command Reference Manual

Related commands
hello-option lan-delay (PIM view)
•
hello-option override-interval (PIM view)
•
• pim hello-option lan-delay

pim holdtime join-prune

Use pim holdtime join-prune to set the joined/pruned state holdtime timer on an interface.
Use undo pim holdtime join-prune to restore the default.
Syntax
pim holdtime join-prune time
undo pim holdtime join-prune
Default
The joined/pruned state holdtime timer is 210 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
time: Sets the joined/pruned state holdtime timer (in seconds), in the range of 1 to 65535.
Usage guidelines
You can set the joined/pruned state holdtime timer in PIM view or interface view. The configurations
made in PIM view are effective on all interfaces, and the configurations made in interface view are
effective on only the current interface. If you set the joined/pruned state holdtime timer in both PIM view
and interface view, the configuration in interface view always takes precedence.
Examples
# Set the joined/pruned state holdtime timer to 280 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim holdtime join-prune 280
Related commands
holdtime join-prune (PIM view)

pim neighbor-policy

Use pim neighbor-policy to configure a legal source address range for hello messages to guard against
hello message spoofing.
Use undo pim neighbor-policy to restore the default.
Syntax
pim neighbor-policy acl-number
81