Hdd Initialization Procedure; Checking The Security Version; Checking The Security Mark - Canon imageRUNNER ADVANCE C3325 Series Service Manual

HDD Initialization Procedure

1. Items to be prepared
1) PC
Be sure that the version of the Service Support Tool that supports the host machine is
installed.
2) Crossover Ethernet cable.
2. Preparing for the Installation of the System Software of Host machine
1) If the PC and host machine have been started, turn the main power OFF.
2) Connect the PC and the machine using an Cross Ethernet cable. (In case of SST).
3) Turn ON the power of the PC.
3. Registering the system software
1) Insert the latest System Software into the PC using the SST.
2) Start the SST.
3) Click 'Register Firmware'.
4) Select the drive where the system software has been inserted, and click the [SEARCH]
button.
5) Click the [REGISTER] button.
6) Click [OK].
4. Initializing HDD
< In case of SST >
1) Start the host machine with download mode in safe mode.
2) Start the SST.
3) Select the model. Then, select [Single] and click [Start].
4) Click [Format HDD].
5) Select [All], and click [Start].
6) Click [Execute Format].
7) The Format is executed.
8) Click [OK].
9) After formatting is completed, select [Shutdown/Restart], and click [Restart].
10) Click [OK]
11) The power of the host machine is turned OFF.
12) Terminate the SST.
13) Disconnect the Cross Ethernet Cable from the machine, and connect the user's
network cable to the machine.
9
Installation > TYPE-1: HDD Data Encryption Kit Installation Procedure > Checking the Security Mark
<In case of USB flash drive>
1) Connect the USB memory to the PC.
2) Start up SST, and click the USB icon displayed in the target selection screen.
3) Select the drive, the model series, and the version to be written to the USB flash drive, and
click [Confirm].
4) Click [Start], and after the version has been written to the USB flash drive, click [OK] and
then remove the USB flash drive.
5) Terminate the SST.
6) Connect the USB memory device to the host machine, and start the host machine with
download mode in safe mode.
7) Press keys on the Control Panel in the order shown below.
• Press any keys
• [4] : Clear/Format
• [1] : Disk Format
• [0] : OK
• Press any keys
• [C] : Return to Menu
• [Reset] : Start shutdown sequence
• [0] : OK (The power of the host machine is turned OFF automatically.)
8) Remove the USB flash drive.
9) Turn ON the main power switch.

Checking the Security Version

1) .Press the Counter Check key on the control panel.
2) Press the [Check Device Configuration] key appearing on the control panel.
3) Confirm that '2.01' is displayed for the [Canon MFP Security Chip] item indicating the
version of the security chip.
If multiple Encryption Boards are installed, the version information for each board is
displayed.
CAUTION:
The user can refer to the version displayed in the [Canon MFP Security Chip] item
indicating the version of the security chip to confirm that an Encryption Board that
contains a security chip version that has received CC certification is operating correctly.

Checking the Security Mark

The user can check the security mark displayed on the Control Panel when using the host
9 Installation > TYPE-1: HDD Data Encryption Kit Installation Procedure > Checking the Security Mark
9-120
9-120