Canon imageRUNNER ADVANCE C3325 Series Service Manual page 857

17) Remove the covers of the 7 Cord Guides, and affix the Cord Guides to the position
as shown in the figure.
18) Insert the DVI Cable through the Cord Guides, and install the 7 covers of the Cord
Guides.
CAUTION:
• Do not cover the Exhaust Outlet with the Cord Guide.
• Do not affix a Cord Guide on the Reader Cable Cover.
7x
9
Installation > Voice Operation Kit-C2 > Installation Procedure
19)
Reader Cable Cover
20)
Board.
Exhaust
Outlet
F-9-159
9 Installation > Voice Operation Kit-C2 > Installation Procedure
Putting the user's External Switch Cable around the Ring Core.
CAUTION:
Be sure to install the Ring Core as close to where the cable is connected as possible.
Insert the user's External Switch Cable into the terminal of the Voice Operation
1x
0
9-69
F-9-160
F-9-161
9-69