Table of Contents
Advertisement
15.11 Download (DOWNLOAD)
15.11.1 Download
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
The following parts of this unit can be upgraded by executing download mode using the service support tool (SST) (for more information, see the "Upgrading"
section):
Main unit
- Flash ROM (system + boot) mounted on the image processor PCB
- ROM mounted on the PCL board
15.12 Initialization of Set Value (CLEAR)
15.12.1 Clear
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Group
TEL & USER DATA
SERVICE DATA
COUNTER
TYPE
SOFT-CNT
HST
CARD
ERR
PWD
FILE SYSTEM
FORMAT
ALL
15.13 Error Display (ERROR DISPLAY)
15.13.1 Error Display
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
The error and detailed code which have happened now are shown.
The error code is displayed on the upper sida and a detailed code is displayed on the lower side.
15.14 Display of ROM Information (ROM)
15.14.1 ROM display
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
The table below lists the items of ROM display mode that are supported.
Item
MAIN
MAIN2
ECONT
OPROM
Item
Clears all user-registered and -set areas of telephone registration data and user data.
(Telephone registration refers to the registration of codes on one-touch dialing,
abbreviated dialing, and group dialing.)
Clears the system dump list, except for counters and clear dates.
Clears the maintenance counter, parts counter and mode-specific counters.
Initializes the counter (numerator) in the system dump list.
Initializes user data and service data to suit specified destination settings.
Not used
ACTIVITY
Initializes the activity report
ACCOUNT
Clears print histories.
JAM
Clears the jam history.
ERR
Clear the error (error code) history.
ALARM
Clears the alarm history.
Clears department management information held in the controller before the card
reader is demounted.
E355
Not used
E719
Clears card reader errors.
Clears the system administrator's password.
Not used
USB MEMORY
Format the USB memory. (This mode is used when the USB memory error is
damaged.)
LICENSE
Not used
DRIVE
Clears user and service data (except for some scan parameters and print parameters),
and the counter setting/registration data in the system dump list, except for the print
count.
T-15-23
Explanation
Displays the version number of the ROM (SYSTEM) mounted on the image
processor PCB.
Displays the version of the ROM (BOOT) mounted on the image processor
PCB.
Displays the version number of the ROM mounted on the DC controller PCB.
Displays the version number of the option ROM.
Explanation
Chapter 15
0013-1418
0013-1419
0013-8006
0013-1420
15-33
Advertisement
Table of Contents
