Canon imageRUNNER ADVANCE C3325 Series Service Manual page 677

COPIER>FUNCTION>CLEAR
LS-INT-V Initial laser distortion correct offset
Lv.2 Details To return the offset value of the laser distortion correction to 0
(initialization).
Execute this item before performing distortion correction between Y/M/
Bk and C.
Use case When color displacement occurs at the center of an image (especially
at installation or at replacement of the Laser Scanner Unit)
Adj/set/operate method Select the item, and then press OK key.
Default value 0
Related service mode COPIER> ADJUST> IMG-REG> LS-V-YL/YC/YR/ML/MC/MR/KL/KC/
KR
JV-TYPE [Not used]
8
Service Mode > COPIER > FUNCTION > MISC-R
T-8-40
8 Service Mode > COPIER > FUNCTION > MISC-R
■ MISC-R
COPIER>FUNCTION>MISC-R
SCANLAMP Light-up check of LED
Lv.1 Details To light up the Scanning Lamp for 3 seconds under the White Plate
and the Copyboard Glass respectively.
Use case When replacing the LED
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
Required time 7 sec
RD-SHPOS Moving to Scanner Unit fixing position
Lv.2 Details To move the Scanner Unit to the position where it is fixed when
moving.
When moving the installed machine, the Scanner Unit may move and
get damage. By moving the Scanner Unit to the specified position
and securing it in place with a screw before moving, damage can be
prevented.
Use case When moving the installed machine
Adj/set/operate method Select the item, and then press OK key.
Caution Be sure to move the Scanner Unit to the fixing position and secure
it in place with a screw when moving the Reader after installation.
Otherwise, the Scanner Unit may get damage.
Display/adj/set range During operation: ACTIVE, When operation finished normally: OK!
8-126
T-8-41
8-126