Canon imageRUNNER ADVANCE C3325 Series Service Manual page 787

SORTER>OPTION
PADL-TM Set ppr rtn time extsn: 2-sided, Fin-G1
Lv.2 Details To set whether to extend paper pull-back time at 2-sided print.
When 1 is set, paper pull-back time becomes 550 msec longer in the
case of 2-sided printing using plain paper 1 or larger size paper.
Use case When paper pull-back failure occurs at high-density full-color 2-sided
printing
Adj/set/operate method Enter the setting value, and then press OK key.
Caution When 1 is set, productivity is decreased.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
FR-ST-SW Stp-free Stp Set in No Stp Ctrdg: Fin-G1
Lv.1 Details When the staple cartridge is absent, staple-free stapling is not
actually performed in the default setting while a job with staple-free
stapling has executed since the finisher behaves in non-sort mode.
Set to "1" to enable the staple-free stapling without staple cartridge.
Use case When utilize the staple-free stapling without staple cartridge
Adj/set/operate method Enter the setting value, and then press OK key.
Caution If a staple cartridge should be left in the finisher with the setting turns
to "1" and the cartridge sits unstable, error; 1C32 or E532 may come
out when staple-free stapling is performed.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8
Service Mode > SORTER > OPTION
T-8-82
8 Service Mode > SORTER > OPTION
8-236
8-236