Canon imageRUNNER ADVANCE C3325 Series Service Manual page 737

COPIER>OPTION>USER
CLR-TIM Set of HDD Encry Kit data delete timing
Lv.2 Details To set the timing to completely delete the data when HDD Encryption
Kit is used.
Selecting 0 may reduce the job processing speed because page data
that has been already processed is deleted while the other job is in
process, causing overload to CPU and HDD access.
Selecting 1 improves the job processing speed because the process is
executed after a job is completed.
Use case Upon user's request (to improve the job processing speed)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: During job process, 1: After the job is completed
Default value 0
JA-FORMT Display of job archive record format
Lv.2 Details To display the format of images for job archives recorded in jobs other
than FAX reception and IFAX reception, etc.
Whether the images processed by Packet JPEG are recorded in
Packet JPEG, or converted into Raster JPEG and then recorded is
displayed.
Make the setting with the MEAP program which supports job archiving.
Use case Upon user's request
Adj/set/operate method N/A (Display only)
Caution Setting cannot be made with this item.
Display/adj/set range 0 to 1
0: Packet JPEG, 1: Raster JPEG
Default value 0
HDCR-DSW ON/OFF of HDD complete deletion display
Lv.1 Details To set whether to display "Hard Disk Data Complete Deletion" in
Settings/Registration menu.
When 1 is set, unneeded data in the hard disk can be deleted
completely on the HDD Data Complete Deletion screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
Related user mode Management Settings> Data Management> HDD Data Complete
Deletion> Hard Disk Data Complete Deletion
BWCL-DSP ON/OFF of color/B&W selection screen
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER>OPTION>USER
Lv.2 Details To set whether to display the color/B&W selection screen to select the
default of the color mode.
Use case When displaying the color mode default selection screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
SCALL-SW [Not used]
SCALLCMP [Not used]
USBH-DSP ON/OFF of "Use USB Host" display
Lv.2 Details To set whether to display "Use USB Host" in Settings/Registration
menu.
When 1 is set, whether to use USB host can be selected on USB
Settings screen.
Use case When allowing the user administrator to select whether to use the USB
host
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related user mode Preferences> External Interface> USB Settings> Use USB Host
USBM-DSP ON/OFF USB ex-mem device MEAP driver use
Lv.2 Details To set whether to display "Use MEAP Driver for USB External Device"
in Settings/Registration menu.
When 0 is set, the item is not displayed so that the user administrator
cannot change the setting.
Use case When not allowing the user administrator to select whether to use the
MEAP driver
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When setting 0, be sure to make the setting after the specified setting
is completed.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
Related user mode Preferences> External Interface> USB Settings> Use MEAP Driver for
USB Storage Device
USBI-DSP ON/OFF USB input device MEAP driver use
8-186
8-186