Canon imageRUNNER ADVANCE C3325 Series Service Manual page 731

COPIER>OPTION>USER
MF-LG-ST ON/OFF of [Long Original] button dspl
Lv.2 Details To set whether to display [Long Original] button in the Control Panel
menu.
When 1 is set, the button is displayed in Copy> Options screen and
the long length paper can be used.
Use case Upon user's request (to use long original or long length paper)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Long length paper is delivered to the Second Output Tray (excluding
delivery from the Inner Finisher).
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related user mode Copy> Options
CNT-DISP ON/OFF of serial No. display
Lv.2 Details To set whether to display the serial number on the Counter Check
screen.
Use case When not displaying the serial number on the Counter Check screen
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: ON, 1: OFF
Default value 0
COPY-JOB Set to allow copy job reservation
Lv.1 Details To set whether to allow copy job reservation when the Card Reader/
Coin Manager is used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Allowed, 1: Prohibited
Default value 0
OP-SZ-DT ON/OFF of orgnl size detect:Cpybrd open
Lv.2 Details To set whether to automatically detect the original size while the
Copyboard is opened.
When 0 is set, original size is not automatically detected. Enter the
size manually from the Control Panel.
When 1 is set, the size is automatically detected.
Use case When preferring to perform original size detection while the Copyboard
is opened
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER>OPTION>USER
P-CRG-LF ON/OFF of Drum Unit life warning display
Lv.1 Details To set whether to display a warning message when the Drum Unit
reaches its life.
When 1 is set, a warning message is displayed on the status line of
the Control Panel seven days later that the value of Y/M/C/K-DRM-LF
reached the setting value of D-DLV-CL/BK.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> COUNTER> LF> Y/M/C/K-DRM-LF
COPIER> OPTION> FNC-SW> D-DLV-BK/CL
Supplement/memo The timing to display the warning message can be adjusted by D-DLV-
CL/BK.
CPRT-DSP ON/OFF of [Print Charge Log] button dspl
Lv.1 Details To set whether to display [Print Charge Log] button to print the charge
logs on the charge log screen in Settings/Registration menu.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related user mode Management Settings> Charge Management> Charge Log
PCL-COPY Set of PCL COPIES command control method
Lv.2 Details To set the binder control method of COPIES command with PCL.
Select whether to use the control method of Canon-made PCL or use
a method equivalent to that of non-Canon-made PCL.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 65535
0: Control method of Canon-made PCL (following the value of COPIES
command that is specified for each page to control on a page basis)
1: Control method of non-Canon-made PCL (handling the value of
COPIES command, which is specified for page 1 when collating, as
bind figure while the value of COPIES command for the next page or
later is invalid. Same control applies as Canon-made PCL when not
collating)
2 to 65535: For future use
Default value 0
8-180
8-180