Removing The Drum Unit; Image Formation System - Canon imageRUNNER ADVANCE C3325 Series Service Manual

4
Disassembly/Assembly■>■Image■Formation■System■>■Removing■the■Drum■Unit
Image■Formation■System
Removing■the■Drum■Unit
CAUTION:
If■you■perform■work■while■in■Deep■sleep■mode■or■when■the■power■was■turned■OFF■while■
in■Deep■sleep■mode,■the■Primary■Transfer■Roller■will■not■be■disengaged.
When■removing■the■Drum■Unit■(Bk),■be■sure■to■do■so■after■returning■the■machine■to■a■
standby■state.
1)■Open■the■Front■Door.
2)■Open■the■Drum■Unit■Retaining■Cover■[1].
[1]
4 Disassembly/Assembly■>■Image■Formation■System■>■Removing■the■Drum■Unit
3)■Pinch■the■light-blue■[A]■part,■and■pull■out■the■Drum■Unit■[1].
CAUTION:
Since■there■is■a■risk■of■damaging■the■Photosensitive■Drum,■do■not■touch■the■surface.
Be■sure■to■block■light■to■the■removed■Drum■Unit■using■paper,■otherwise■it■will■be■
exposed■to■light.
F-4-104
[A]
[1]
4-55
F-4-105
4-55