Canon imageRUNNER ADVANCE C3325 Series Service Manual page 811

12. <Output Report>
Select the Setting Value List , [Start Printing] > OK.
NOTE:
Be sure to keep the report which has been output.
13. <Setup Guide Done>
When Setup Guide is completed, the machine is automatically restarted.
14. Check the following values from the Setting Value List which has been output in step "12
< Output Report >", and write them down in the service label inside the Front Cover.
• CONT-Y
• CONT-M
• CONT-C
• CONT-K
• D-Y-LVL
• D-M-LVL
• D-C-LVL
• D-K-LVL
NOTE: Values to be written down
Check the values surrounded by the frame on the first sheet of the Setting Value List.
9
Installation > imageRUNNER ADVANCE C3300 > Host Machine Settings (Starting the Setup Guide) > Informing the System Administrator That In
F-9-50
9 Installation > imageRUNNER ADVANCE C3300 > Host Machine Settings (Starting the Setup Guide) > Informing the System Administrator That In
■ Informing the System Administrator That Installation Is
Complete
When the installation is completed, ask the system administrator to change the password.
Also ask the system administrator to keep the changed password in a safe place to prevent
leakage.
9-23
9-23