Canon imageRUNNER ADVANCE C3325 Series Service Manual page 720

COPIER > OPTION > NETWORK
NS-NTLM Limit NTLM auth method: SMTP auth
Lv.2 Details To restrict use of NTLM authentication method at the time of SMTP
authentication.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user authentication function
is added to SMTP, which is the protocol to be used for e-mail
transmission. At the time of e-mail transmission, this protocol executes
authentication of the user account and the password between the
SMTP server and the user to approve e-mail transmission only when
it's authenticated.
NS-PLNWS Limit plaintext auth: SMTP auth, encry
Lv.2 Details To restrict use of PLAIN/LOGIN authentication, which is plaintext
authentication, at the time of SMTP authentication under the
environment where the communication packet is encrypted.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user authentication function
is added to SMTP, which is the protocol to be used for e-mail
transmission. At the time of e-mail transmission, this protocol executes
authentication of the user account and the password between the
SMTP server and the user to approve e-mail transmission only when
it's authenticated.
NS-PLN Limit plaintext auth: SMTP auth, noencry
Lv.2 Details To restrict use of PLAIN/LOGIN authentication, which is plaintext
authentication, at the time of SMTP authentication under the
environment where the communication packet is not encrypted.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user authentication function
is added to SMTP, which is the protocol to be used for e-mail
transmission. At the time of e-mail transmission, this protocol executes
authentication of the user account and the password between the
SMTP server and the user to approve e-mail transmission only when
it's authenticated.
8
Service Mode > COPIER > OPTION > NETWORK
8 Service Mode > COPIER > OPTION > NETWORK
COPIER > OPTION > NETWORK
NS-LGN Limit LOGIN authentication: SMTP auth
Lv.2 Details To restrict use of LOGIN authentication at the time of SMTP
authentication.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: SMTP server-dependent, 1: Not used
Default value 0
Supplement/memo SMTP authentication: Protocol in which user authentication function
is added to SMTP, which is the protocol to be used for e-mail
transmission. At the time of e-mail transmission, this protocol executes
authentication of the user account and the password between the
SMTP server and the user to approve e-mail transmission only when
it's authenticated.
MEAP-PN Set of HTTP port No. of MEAP application
Lv.2 Details To set HTTP port number of MEAP application.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not specify port 8080 when the print server is connected.
Otherwise, you cannot browse remote UI of the device in which
MEAP authentication application is running (Port 8080 is reserved for
redirection of EFI Controller to the iR side).
Display/adj/set range 1 to 65535
Default value 8000
RMT-LGIN For R&D
CHNG-STS [Not used]
CHNG-CMD [Not used]
MEAP-SSL Setting of HTTPS port for MEAP
Lv.2 Details To set the port of HTTPS server in the case of using SSL with HTTP of
MEAP.
Use case When setting HTTPS port for MEAP
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 65535
Default value 8443
LPD-PORT Setting of LPD port number
Lv.2 Details To set the LPD port number.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 65535
Default value 515
Supplement/memo LPD port: Network port for TCP/IP communication when making prints
through network.
8-169
8-169