Canon imageRUNNER ADVANCE C3325 Series Service Manual page 154

2
Technical Explanation > MEAP > Settign Procedure > Check Procedure
■ Check Procedure
● Device Resource
1) Log in to SMS.
2) Click [MEAP Application Management].
3) Check [Resource Information] for information of the whole device resources.
Note:
• Among the resources, the free space of Storage is checked when installing an application.
For other resources, the free space is checked when the application is started.
• Some applications call for a specific set of conditions for installation. For details, see the
User's Guide that comes with the individual applications.
• Maximum installable application is up to 20 even if the remaining resource is adequate.
(However, the Send function consumes 1, it must be 19 in practice.) Authentication
application is not included in this number.
• The MEAP application, which can be started simultaneously, is up to 19. (Authentication
application is not included in this number.)
CAUTION:
To install an application, the user needs to use the following URL when accessing the license
control system to obtain a license file. In doing so, he/she needs to register the license access
number of the application and the serial number of the device.
http://www.canon.com/lms/license/
2 Technical Explanation > MEAP > Settign Procedure > Check Procedure
● System Information
1) Log in to SMS, and select [System Info] on System Management menu.
2) Click [Display Details].
3) System information of each application (including system applications) is shown in an
additional window. Copy and paste all the information in a file to attach to AR reports as
text information. This function is useful to check status information of each application.
F-2-163
2-118
F-2-164
F-2-165
2-118