Canon imageRUNNER ADVANCE C3325 Series Service Manual page 696

COPIER > OPTION > DSPLY-SW
2TR-DSP ON/OFF of Sec Trn Out Rol cntr init scrn
Lv.1 Details To set whether to display the Secondary Transfer Outer Roller on the
counter initialization screen in Settings/Registration menu.
Use case When the user replaces the parts
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
COM10-DL ON/OFF of DL/COM10 landscape display
Lv.2 Details To set whether to display landscape direction for DL/COM10 (envelope)
on the Select Paper screen of the Cassette 1.
Use case Upon user's request (to change the feed direction to landscape due to
setting of a small number of envelopes on the Multi-purpose Tray and
low productivity with portrait feeding)
Adj/set/operate method 1) Set DL/COM10 on the Cassette 1 (landscape direction).
2) Enter the setting value, and then press OK key.
Caution Be sure to get approval from the user by telling that jam may occur to
improve productivity.
Display/adj/set range 0 to 1
0: OFF (display only portrait feeding), 1: ON
Default value 0
LOCAL-SZ ON/OFF area-spec stdrd size ppr set scrn
Lv.1 Details To set whether to display the area-specific standard size paper on the
paper settings screen in Settings/Registration menu.
When 1 is set, paper type (FOOLSCAP, OFFICIO, etc.) can be set on
the paper settings screen for each paper source (except the Cassette
1).
Use case Upon user's request
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value It differs according to the location.
Related user mode Preferences> Paper Settings> Paper Settings
Supplement/memo - Display order of paper name on the paper settings screen differs
according on the location.
- The area-specific standard size paper cannot be set for both the
Cassette 1 and 2 for the 1-cassette model for China.
8
Service Mode > COPIER > OPTION > IMG-FIX
T-8-46
8 Service Mode > COPIER > OPTION > IMG-FIX
■ IMG-FIX
COPIER > OPTION > IMG-FIX
FX-S-TMP Set ITOP control temp: plain 1, colored
Lv.1 Details To set the offset of ITOP control temperature for plain paper 1 (64 to 75
g/m2) and colored paper at 1/1 speed.
As the value is changed by 1, the control temperature is changed by 5
deg C.
Decrease the value when uneven gloss occurs, and increase the value
when a fixing failure occurs on the leading edge of paper.
Use case When uneven gloss occurs on the leading edge (74 mm) of plain paper
1 and colored paper
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and press
OK key.
Caution If the value is too large, uneven gloss may occur.
If the value is too small, a fixing failure may occur on the leading edge
of paper. (Toner does not peel off.)
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
TMP-TBL2 Set fixing control temp: heavy paper 1
Lv.1 Details To set the offset of fixing control temperature for heavy paper 1 (106 to
128 g/m2).
As the value is changed by 1, the control temperature is changed by 5
deg C.
Increase the value when a fixing failure occurs, and decrease the value
when fixing offset occurs.
Use case When a fixing failure/fixing offset occurs on heavy paper 1
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and press
OK key.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit 5 deg C
Default value 0
8-145
8-145