Canon imageRUNNER ADVANCE C3325 Series Service Manual page 592

■ HT-C
COPIER>DISPLAY>HT-C
TGT-A-Y Dspl ARCDAT screen A Y-color target VL
Lv.2 Details To display the Y-color patch target value of screen A in ARCDAT
control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-A-M Dspl ARCDAT screen A M-color target VL
Lv.2 Details To display the M-color patch target value of screen A in ARCDAT
control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-A-C Dspl ARCDAT screen A C-color target VL
Lv.2 Details To display the C-color patch target value of screen A in ARCDAT
control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-A-K Dspl ARCDAT screen A Bk-color target VL
Lv.2 Details To display the Bk-color patch target value of screen A in ARCDAT
control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-B-Y Dspl ARCDAT screen B Y-color target VL
Lv.2 Details To display the Y-color patch target value of screen B in ARCDAT
control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
8
Service Mode > COPIER > DISPLAY > HT-C
8 Service Mode > COPIER > DISPLAY > HT-C
COPIER>DISPLAY>HT-C
TGT-B-M Dspl ARCDAT screen B M-color target VL
Lv.2 Details To display the M-color patch target value of screen B in ARCDAT
control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-B-C Dspl ARCDAT screen B C-color target VL
Lv.2 Details To display the C-color patch target value of screen B in ARCDAT
control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-B-K Dspl ARCDAT screen B Bk-color target VL
Lv.2 Details To display the Bk-color patch target value of screen B in ARCDAT
control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-C-Y Dspl ARCDAT screen C Y-color target VL
Lv.2 Details To display the Y-color patch target value of screen C in ARCDAT
control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
TGT-C-M Dspl ARCDAT screen C M-color target VL
Lv.2 Details To display the M-color patch target value of screen C in ARCDAT
control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Display/adj/set range 0 to 1023
Appropriate target value 0 - 700
8-41
8-41