Canon imageRUNNER ADVANCE C3325 Series Service Manual page 839

15)
9
Installation > Copy Card Reader-F1/Copy Card Reader Attachment Kit-B4 > Installation Procedure > Installing the Copy Card Reader
16)
as shown in the figure.
17)
Cord Guides and Wire Saddle.
18)
19)
CAUTION:
• Do not cover the Exhaust Outlet with the Cord Guide.
• Do not affix a Cord Guide on the Reader Cable Cover.
F-9-112
20)
21)
9 Installation > Copy Card Reader-F1/Copy Card Reader Attachment Kit-B4 > Installation Procedure > Installing the Copy Card Reader
Remove the covers of the 2 Cord Guides, and affix the Cord Guides to the position
Fold the Card Reader External Relay Cable at the [A] part and pass it through the
Install the 2 covers of the Cord Guides.
Close the 1 Wire Saddle.
3x
Connect the power plug to the outlet.
Turn ON the main power switch of the host machine.
9-51
Reader
Cable Cover
[A]
Wire Saddle
Exhaust Outlet
F-9-113
9-51