System Management Operations; Enabling [Manual Update] Button Of Remote Ui; Setting Log Level - Canon imageRUNNER ADVANCE C3325 Series Service Manual

2
Technical Explanation > Updater > System Management Operations > Setting Log Level

■ Enabling [Manual Update] Button of Remote UI

To allow users to install firmware from Updater using the file on Local PCs, the setting of
firmware installation should be set to ON for users in advance.
Set "1" in the following service mode.
• COPIER >Option >FNC-SW >LOCLFIRM
• Remote UI screen of Updater when the setting is not enabled (LOCLFIRM (0)):
• Remote UI screen of Updater when the setting is enabled (LOCLFIRM (1)):
2 Technical Explanation > Updater > System Management Operations > Setting Log Level

System Management Operations

■ Setting Log Level

1) Press [Updater] in the service mode menu.
2) Press [Software Management Settings] button.
F-2-202
3) Press [Settings] button.
F-2-203
2-152
F-2-204
F-2-205
2-152