Procedure To Install Applications - Canon imageRUNNER ADVANCE C3325 Series Service Manual

2
Technical Explanation > MEAP > Settign Procedure > Procedure to Install Applications

■ Procedure to Install Applications

1) Long on to SMS, and click [Install MEAP Application] on the menu.
2) Perform the following settings, and click [Install].
1. Click [Browse], and select the application file and license file to install.
2. On the same page, select either [Install and Start] or [Only Install] in [Operation to
Perform].
Note:
Application File: identified by the extension "jar".
License File: identified by the extension "lic".
CAUTION:
• You cannot install only the license.
• You will not be able to install the application without using the appropriate license.
Be sure to select its license file.
• If you are adding a license to an existing application, see "Procedure Adding a
License File".
• If you are updating an existing application, stop the application; then, install the new
application or its license file. You will not be able to update an application while it is
running.
2 Technical Explanation > MEAP > Settign Procedure > Procedure to Install Applications
Note:
The license file is provided in text file format, enabling to view in a text editor. The
application ID and device serial number shown in the file allow users to confirm which
device to install with the license file.
Note that any changes added to the license file may disable installation. Cares should
be taken when confirming the contents of the license file.
Sample file
F-2-125
3) Check the contents of the Confirm page; then, click [OK].
2-108
License File ID
Application ID
Serial Number
Validated Period
Counter informations
F-2-126
F-2-127
2-108