Import/Export By Service Mode (Internal) - Canon imageRUNNER ADVANCE C3325 Series Service Manual

2
Technical Explanation > DCM > Import/Export by Service Mode (Internal) > Export Procedure
8) "OK!" is displayed in the status column when the processing is successfully completed.
Press [<-].
9) Select [LIST], enter "0" and press [OK].
1 1
2 2
Note:
Make sure to restart the device after importing a file.
2 Technical Explanation > DCM > Import/Export by Service Mode (Internal) > Export Procedure
F-2-235
3 3
4 4
F-2-236

Import/Export by Service Mode (Internal)

Import/export by service mode allows the selection between USB device and internal HDD for
the save destination of DCM files.
The procedure of import/export when internal HDD is selected is shown below.
It can be used when recovering the initial status after having tried multiple setting changes
temporarily for troubleshooting, etc.
Note:
• DCM must not be used when replacing PCBs. Be sure to perform backup of DCON/
RCON in service mode
• Maximum of 2 files can be saved in the host machine's HDD
■ Export Procedure
1) Log in to service mode and press [BACKUP].
2) Select [LIST], enter "2" and press [OK].
2-166
F-2-237
1 1
2 2
F-2-238
2-166