Canon imageRUNNER ADVANCE C3325 Series Service Manual page 810

When not executing Setup Guide, it can be canceled by pressing [Cancel] on the Touch
Panel Display. When executing Setup Guide, follow the Setup Guide to specify the items in
the order shown below:
1. <Switch Language/Keyboard>
Select the displayed language and keyboard layout.
2. <Paper Settings>
2-1) Select the paper source for which you want to specify the paper type, and press [Set].
2-2) Select the paper type, and press [OK].
2-3) If [Plain] is selected, the basis weight can be specify from [Plain Paper Weight Set].
2-4) If a button corresponding to the paper that has been set is not displayed, press
[Detailed Settings] and make a selection on the detailed settings screen.
NOTE:
• If the corresponding paper type is not displayed on the simple settings screen, press
[Detailed Settings] and make a selection on the detailed settings screen.
• If the type of loaded paper is not displayed on the detailed settings screen, you can
register it.
3. <Authentication Login>
NOTE:
Pressing [Skip] proceeds to auto gradation adjustment instead of the setting of system
administrator privilege.
Press [Log in], and enter a password.
CAUTION:
• Do not change Administrator here.
• Enter the initial value "7654321" in the password entry field.
9
Installation > imageRUNNER ADVANCE C3300 > Host Machine Settings (Starting the Setup Guide)
4. <Use Optional Output Tray>
Set whether to use the optional output tray.
CAUTION:
Make sure the output tray that is set to On is attached to the device, or the output tray
will not function correctly.
5. <Date/Time Settings>
Set the date and time.
CAUTION:
Perform the network settings according to the user's request.
6. <Use IP Address>
Specify IPv4 and/or IPv6, and each IP address.
7. <DNS Server Address Settings>
Configure the DNS Server Address Settings, the DNS Host/Domain Name Settings, and the
DNS Dynamic Update Settings.
8. <Proxy Settings>
Specify the Proxy Settings.
9. <Country/Region> (FAX-TYPE settings)
Select Country/Region.
10. <Register Unit Telephone Number>
Set the phone number, the name the machine will appear as on the network, and the line
type.
11.<Auto Adjust Gradation>
Select [Full Adjust].
9 Installation > imageRUNNER ADVANCE C3300 > Host Machine Settings (Starting the Setup Guide)
9-22
9-22