Test Print; Steps To Select The Test Print Type; Overview - Canon imageRUNNER ADVANCE C3325 Series Service Manual

Test■Print

Overview

This■machine■have■the■following■test■print■TYPE■and■you■can■judge■the■image■failure■that■is■checked■as■"Yes"■in■the■following■image■check■items■with■each■test■print.
If■the■image■failure■occurred■on■normal■output■does■not■reappear■on■the■test■print,■it■may■be■caused■by■the■PDL■input■or■reader■side.
PG■
TYPE■Pattern
TYPE
0 Normal■copy■/■print
1to3 ---(For■R&D)
4 16■gradations
5 Full■half-tone
6 Grid
7 ---(For■R&D)
8 Half-tone■/■Patch
9 ---(For■R&D)
10 MCYBk■horizontal■stripes
(sub■scanning■direction)
11 ---(For■R&D)
12 MCYBk■64-gradation
13 ---(For■R&D)
14 Full■color■16-gradation
Steps■to■select■the■test■print■TYPE
1)■Set■the■number■of■print,■paper■size■etc.
2)■Select:■COPIER■>■TEST■>■PG.
3)■Select:■COPIER■>■TEST■>■PG■>■TYPE.
4)■Enter■the■desired■TYPE■number■and■press■OK■key.
5)■Select■the■corresponding■color■(setting■1■means■output)■in■COLOR-Y/M/C/K.
6)■Set■the■density■in■DENS-Y/M/C/K■(this■is■enabled■for■TYPE=5■only).
7)■Press■start■key.
6
Troubleshooting■>■Test■Print■>■Steps■to■select■the■test■print■TYPE
Transfer■ Black■line■
Gradation Fogging
Fault (Color■line)
Yes Yes
Yes Yes
Yes Yes Yes
Yes
Yes Yes
Yes Yes
6 Troubleshooting■>■Test■Print■>■Steps■to■select■the■test■print■TYPE
Items
Uneven■ Uneven■Density■
White■line
Density at■the■Front■/■Rea
Yes Yes
Yes Yes Yes
Yes Yes
Yes Yes
Yes
Right■ Straight■ Color■ Originator
Angle Lines displacement
----
----
Main■controller■PCB
Main■controller■PCB
Yes Yes Yes Main■controller■PCB
----
----
Main■controller■PCB
----
Main■controller■PCB
----
Main■controller■PCB
6-3
T-6-2
6-3