Canon imageRUNNER ADVANCE C3325 Series Service Manual page 581

COPIER>DISPLAY>ACC-STS
NIB Display of Network PCB connection state
Lv.1 Details To display the connection state of the Network PCB.
Use case When checking the connection between the machine and the
Network PCB
Display/adj/set range 0 to 3
0: Not yet connected
1: Ethernet PCB connected
2: Token Ring PCB connected
3: Ethernet PCB + Token Ring PCB connected
HDD Display of HDD model name
Lv.1 Details To display the model name of HDD.
Use case When checking the model name of HDD used on the machine
PCI1 Display of PCI1-connected PCB name
Lv.1 Details To display the name of the PCB that is connected to PCI1.
Use case When checking the name of the PCB that is connected to PCI1
Display/adj/set range -: No PCB connected
Voice Board: Voice PCB
3DES Board: Encryption PCB
1Gbit-Board: Giga Ethernet PCB
PCI2 Display of PCI2-connected PCB name
Lv.1 Details To display the name of the PCB that is connected to PCI2.
Use case When checking name of the PCB that is connected to PCI2
Display/adj/set range -: No PCB connected
iSLOT: iSLOT Wireless LAN PCB
Voice Board: Voice PCB
Voice Board R: Voice Recognition PCB (Display is hidden on this
machine.)
3DES Board: Encryption PCB
1Gbit-Board: Giga Ethernet PCB
PCI3 Display of PCI3-connected PCB name
Lv.1 Details To display the name of the PCB that is connected to PCI3.
Use case When checking name of the PCB that is connected to PCI3
Display/adj/set range -: No PCB connected
iSLOT: iSLOT Wireless LAN PCB
Voice Board: Voice PCB
Voice Board R: Voice Recognition PCB (Display is hidden on this
machine.)
3DES Board: Encryption PCB
1Gbit-Board: Giga Ethernet PCB
IA-RAM Display of MNCON PCB memory(IA) capacity
Lv.1 Details To display the memory (IA) capacity of the Main Controller PCB.
Use case When checking the memory capacity of the Main Controller PCB
Adj/set/operate method N/A (Display only)
Display/adj/set range 1024 (Fixed)
Unit - -
8
Service Mode > COPIER > DISPLAY > ACC-STS
8 Service Mode > COPIER > DISPLAY > ACC-STS
COPIER>DISPLAY>ACC-STS
MN-RAM Display of MNCON PCB memory capacity
Lv.1 Details To display the memory capacity of the Main Controller PCB.
Use case When checking the memory capacity of the Main Controller PCB
Adj/set/operate method N/A (Display only)
Display/adj/set range 1024 (Fixed)
8-30
T-8-8
8-30