1. Open the Front Cover [1], and remove the Toner Container (Bk) [2].
Removing the Drum Unit (Y/M/C/Bk)
■ Preparation
1.
"Removing the Waste Toner Container" on page 221
■ Procedure
NOTE:
In this procedure, the procedure for the (Bk) color Drum Unit is described.
Be sure to perform the same procedure for (Y/M/C) color.
CAUTION:
Touching the drum part [A] of the Drum Unit may cause finger oil to be attached on the drum. This makes the finger oil on
the drum to be attached to toner, causing the risk of soiled image.
For this reason, be careful not to touch the drum part [A] when handling the Drum Unit.
[1]
222
4. Parts Replacement and Cleaning
[2]
[A]