Removing The Drum Unit - Canon imageRUNNER 2530 Service Manual

4
Parts Replacement and Cleaning > Consumable Parts Requiring Periodic Replacement > Removing the Drum Unit
4) Remove the waste toner container.
5) Remove the lid attached at the front of the waste toner container, and then cover the
opening of the container with it so that the waste toner does not spill out.
4 Parts Replacement and Cleaning > Consumable Parts Requiring Periodic Replacement > Removing the Drum Unit
F-4-73 F-4-73
F-4-74 F-4-74

Removing the Drum Unit

1) Open the right cover.
2) Open the front cover.
3) Remove the waste toner container. ("Removing the Waste Toner Container"(page 4-34).
4) Remove the screw securing the developing assembly pressure lever. (Models for some
destinations do not have this screw.)
5) Turn the lever in the direction of the arrow to release the lock of the drum unit.
x1
6) While raising the lever under the handle of the drum unit, slowly pull out the drum unit to
the position shown below.
4-35
)
F-4-75 F-4-75
F-4-76 F-4-76
4-35