Use Route Monitoring Function (Waypoint/Route Alarm) - JRC JMA-9133-SA Instruction Manual

3.7.4

Use Route Monitoring Function (Waypoint/Route Alarm)

This radar system can monitor the movement of own ship with regard to its route
and activate a variety of alarms.
3.7.4.1 Destination alarm (Waypoint Alarm)
The destination alarm is activated when own ship has reached next Waypoint or own ship
has deviated from the scheduled route.
A Waypoint alarm circle with a specified radius distance is displayed.
Waypoint Alarm has the following two types of alarms:
Arrival: An alarm is activated when own ship has entered the circle from outside.
Break Off: An alarm is activated when own ship has left the circle to the outside.
Procedures
1) Open the WPT/Route Setting menu by performing the menu
operation below.
2) Left-click the set value of the
1. Waypoint Alarm
an operation mode.
JMA-9100 Instruction Manual
Destination alarm When own ship arrives at next Waypoint, an alarm will
(Waypoint Alarm): be activated.
Route alarm: When own ship deviates from the specified route, an
alarm will be activated.
Own ship position
Route
→ 2. WPT/Route Setting
item, and select
3－ 79
> >
3.BASIC OPERATION 3.7 USE ROUTE FUNCTION
Waypoint alarm circle
To Waypoint
1. Waypoint Alarm
Operation mode
Arrival 0.00nm
Radius of the
Waypoint alarm
circle
3