Correct Position On User Map (Shift User Map) - JRC JMA-7133-SA Instruction Manual

>
JMA-7100 Instruction Manual 3.BASIC OPERATION
3) Left-click the
The selected mark will be deleted.
3.6.4

Correct Position on User Map (Shift User Map)

3.6.4.1 Correcting the display position on the user map (Shift)
If the display position on the user map is different from an actual position, it can be changed
to the correct position in manual mode.
Procedures
Open the [Shift] menu by performing the menu operation below.
1)
Shift
selected.
Put the pointer on a mark or end of a line, coastline, or depth
2)
contour line, and left-click.
3) Move the cross cursor mark to the location to be corrected, and
left-click.
Positions of all marks and lines currently displayed will be corrected.
At this time, Map Shift is displayed in the map position correction (lower right of the
display), indicating that the position is being corrected.
>
3.6 DISPLAY USER MAP
button.
1. Yes
NOTE: If data is not copied on the flash memory card (option), the data
is not be reloaded.
U.Map
→
is displayed for the Cursor mode, indicating that the user map shift mode is
Map Shift
: Heading correction is conducted
Map Shift : Heading correction is not conducted
3－ 60
3. Shift