Setting Up The Display Of Unit Of Setting Value; Setting Control Of The Top Screen And Menus - JRC JMR-5406-X Instruction Manual

Marine radar equipment
Hide thumbs Also See for JMR-5406-X:
Table of Contents

Advertisement

11.1.12 Setting up the display of unit of setting value

Memo
Some items may not be displayed depending on the installation setting.
Set a unit to be displayed for each setting value.
[Operation procedure]
Open the setting screen of unit display by the following menu operations.
[Menu] button → View → Unit
The descriptions of settings are shown in the table below.
Setting Item
Depth
Select a unit of the water depth from the combo box.
Depth
Select a water depth display unit on the chart from the
(C-MAP MAX)
combo box.
Current Speed
Select a unit of the current speed from the combo box.
Wind Speed
Select a unit of the wind speed from the combo box.
Air TEMP
Select a unit of the air temperature from the combo box.
Water TEMP
Select a unit of the water temperature from the combo box.
Air Pressure
Select a unit of the air pressure from the combo box.
Wind Direction
Select a wind direction (true) display method from the
(True)
combo box.

11.1.13 Setting control of the top screen and menus

When you select [Control] in the classification pane, the [Control] dialogue is displayed in the edit pane.
[Operation procedure]
Open the top screen control setting screen by performing the following menu operations.
[Menu] button → View → Control
Top screen information [Page 1]
Set control of the information that is displayed on the top screen.
Setting Item
Show Own Track
Control
Display Key Operation
Number
Menu Display [Page 2]
Set each menu to be displayed or hidden.
This function enables the hiding of menus of low use frequency freely.
1
Set the check box of the target menu to On/Off.
On (selected): Displays on the menu.
Off (cleared): Hides from the menu.
For [View] and [View] – [Control] (this menu) are constantly set to On and cannot be hidden.
Description of Setting
Description of Setting
Selecting this enables to display own track
control.
Display/hide the badge on the target component
by menu operations on numeric keys.
11-17
Setting Value
m / ft / fm
ft / fm / m /decimal fm
kn / m/s / km/h
kn / m/s / km/h
°C / °F
°C / °F
hPa / mbar
16points / Degree
Setting Value
To enable: Select.
To disable: Clear.
Shown: Selected
Hidden: Clear
Section 11 Setting up Screen View
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents