Maintenance Menu; Serial Input Equipment - JRC JMA-3910-4 Instruction Manual

7.5.6 Maintenance Menu

The maintenance menu is used only by our service personnel during installation. Users are requested not to
change the setting.
Maintenance Menu
MAINTENANCE MENU
Press an item number key.
0. PREVIOUS MENU
1. ANTENNA HEIGHT
2. SERIAL INPUT DEVICE
3. ANTENNA SWITCH
4. PARTIAL MASTER RESET
5. ALL MASTER RESET
6. INTERNAL SETTING to CARD 2
7. CARD 2 to INTERNAL SETTING
8. MEMOLIZE USER SETTING
9. RESTORE USER SETTING
To close this menu, Press (SUB MENU) key.

7.5.6.1 Serial Input Equipment

Set the serial input equipment.
1. Press the
Procedures
2. Press the
3. Press the
4. Press the
5. Pres2s the
"RS232C".
6. Press the
7. Press the
Exit
UP to 5m 5–10m
2AXIS LOG HDG SENSOR
TRANSFER DISCARD
SUB
key to open the SUB MENU.
MENU
9
key twice to open the INIT SETTING #2 menu.
8
key to open the MAINTENANCE MENU.
2
key to select "SERIAL INPUT DEVICE".
2
key to select "2AXIS LOG", "HDG SENSOR" or
ENT
key to confirm the setting.
SUB
key.
MENU
7 – 48
10–20m MORE 20m
RS232C
7.5
7